# SurfScanGo: Quick Start

1. Connect Antenna : A1 & A2![SurfScan Go : Antenna & Power Connections](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/bcdc8248-9752-47b6-aef9-c30b5d469051/463922e4-b29e-45d9-a629-f54698764b7e/SurfScanGo%20on%20Bench.png?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260927%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260927T134500Z&X-Amz-Expires=86400&X-Amz-Signature=eb81a16506fb050682ff22dc5a3ffa5b70a44e3a7514140673c89713de6746c9&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject "right-50 =470x470")

   
   1. Connect the supplied Antenna to ports A1 & A2
2. Connect Power Supply : P1

   
   1. Use supplied adapter
   2. Or, compatible USB-C power capable of supporting 5V 3A
3. Connect to SurfScan Wi-Fi

   
   1. From your laptop or tablet connect to “surfscan-<unique id>”
   2. Password : surfscango!!
4. Open browser to start your first Scan! 

   
   1. [Scanner Page](https://172.16.48.1) (https://172.16.48.1)
   2. [SurfScan Admin](https://172.16.48.1/cockpit/) (https://172.16.48.1/admin/)
   3. username: waveriders
   4. password: mySurfscang0!

### Next: [Your first scan…](/doc/surfscan-cellular-network-scanner-JQPI7IygDk)

---

**Documents**

- [SurfScanGo: Advanced Cellular Network Scanner](https://waveriders.getoutline.com/s/6e2a3835-4b9d-4089-b063-c0fb5e416a6c/doc/surfscango-advanced-cellular-network-scanner-JQPI7IygDk)
- [SurfScanGo: View Reports](https://waveriders.getoutline.com/s/6e2a3835-4b9d-4089-b063-c0fb5e416a6c/doc/surfscango-view-reports-SAUg1x0bJQ)